TEM sample preparation of lithographically patterned permalloy nanostructures on silicon nitride membranes

• Joshua Williams,
• Michael I. Faley,
• Joseph Vimal Vas,
• Peng-Han Lu and
• Rafal E. Dunin-Borkowski

Beilstein J. Nanotechnol. 2024, 15, 1–12, doi:10.3762/bjnano.15.1

• using three different fabrication methods: lift-off, ion beam etching (IBE), and stencil lithography. They were further analyzed using different instruments, including scanning electron microscopy, LTEM, and electron holography. A bilayer of positive PMMA resist was utilized in the first fabrication

• advantageous in terms of structural resolution, process simplicity, and the absence of resist residues [21]. We have fabricated ferromagnetic nanodisks on a conventional TEM grid from TedPella® using three different fabrication methods. In the first method, a bilayer of positive PMMA resist yielded an undercut

• lithographically patterned nanostructures to be examined using TEM. The results of the fabrication methods mentioned above were examined using SEM. This is important because the structural information (disk dimensions and deformation from fences) later correlates to the magnetic properties. A magnetic vortex

Hierarchically patterned polyurethane microgrooves featuring nanopillars or nanoholes for neurite elongation and alignment

• Lester Uy Vinzons,
• Guo-Chung Dong and
• Shu-Ping Lin

Beilstein J. Nanotechnol. 2023, 14, 1157–1168, doi:10.3762/bjnano.14.96

• ]. Therefore, there is still a need to develop simple and cost-effective fabrication methods applicable to a wide range of nano- and micropatterns and biomaterials. In our previous studies, we have shown how nanosphere lens lithography (NLL) can be used with a low-cost ultraviolet light-emitting diode (UV-LED

Industrial perspectives for personalized microneedles

• Remmi Danae Baker-Sediako,
• Benjamin Richter,
• Matthias Blaicher,
• Michael Thiel and
• Martin Hermatschweiler

Beilstein J. Nanotechnol. 2023, 14, 857–864, doi:10.3762/bjnano.14.70

• to Nanoscribe’s “Smart Slicing” feature. All strategies, either software or combined fabrication methods, drastically reduce printing time and, ultimately, production cost. Even with software and hardware advances, 2PP is still a layer-by-layer approach, similar to DLP and SLA, such that we see the

Molecular nanoarchitectonics: unification of nanotechnology and molecular/materials science

• Katsuhiko Ariga

Beilstein J. Nanotechnol. 2023, 14, 434–453, doi:10.3762/bjnano.14.35

• molecular level and to understand the properties of molecules at that level. The current mainstream of functional material fabrication is a combination of basic technologies such as organic synthesis, self-assembly, or structure fabrication methods such as the Langmuir–Blodgett (LB) method [130][131] or

Recent trends in Bi-based nanomaterials: challenges, fabrication, enhancement techniques, and environmental applications

• Vishal Dutta,
• Ankush Chauhan,
• Ritesh Verma,
• C. Gopalkrishnan and
• Van-Huy Nguyen

Beilstein J. Nanotechnol. 2022, 13, 1316–1336, doi:10.3762/bjnano.13.109

• photocatalysts in eco-friendly applications on a large scale. Bi-based nanomaterials as semiconductor photocatalysts are one of the study’s primary goals, as is the use of Bi-based nanomaterials for wastewater treatment, hydrogen generation, and photocatalytic degradation. Fabrication methods, reliability

Reliable fabrication of transparent conducting films by cascade centrifugation and Langmuir–Blodgett deposition of electrochemically exfoliated graphene

• Teodora Vićentić,
• Stevan Andrić,
• Vladimir Rajić and
• Marko Spasenović

Beilstein J. Nanotechnol. 2022, 13, 666–674, doi:10.3762/bjnano.13.58

• quantitatively compared to results found in literature that are obtained using other, more complex graphene film fabrication methods, and is found to occur with a percolation exponent and percolative figure of merit that are of the same order as results in literature. A maximum optical transparency of 82.4% at a

Zinc oxide nanostructures for fluorescence and Raman signal enhancement: a review

• Ioana Marica,
• Fran Nekvapil,
• Maria Ștefan,
• Cosmin Farcău and
• Alexandra Falamaș

Beilstein J. Nanotechnol. 2022, 13, 472–490, doi:10.3762/bjnano.13.40

• applications [13]. This review article seeks to present the fabrication methods and applications of zinc oxide nanostructures enhancing the photoluminescence emission or the Raman signal of analyte molecules. First, we focus on a wide range of synthesis methods of ZnO nanostructures and nanocomposites based on

• –Au NPs, and ZnO nanospheres–Au NPs, using this method. Some unusual fabrication methods include a poriferous ZnO–Ag substrate obtained by a film scraping method on paper [51][52]. A film with fluffy sponge-like morphology was obtained, pointing out its high specific surface area and showing uniform

An overview of microneedle applications, materials, and fabrication methods

• Zahra Faraji Rad,
• Philip D. Prewett and
• Graham J. Davies

Beilstein J. Nanotechnol. 2021, 12, 1034–1046, doi:10.3762/bjnano.12.77

• crystal silicon and provide a degree of biodegradability, but their fabrication methods are relatively complex and involve the use of toxic and corrosive chemicals like HF. In addition, the mechanical properties of materials, including Young’s modulus, significantly degrade with increasing porosity. (Note

• are currently receiving more interest because of biocompatibility, superior mechanical properties, low material cost, and biodegradability. The low-cost of fabrication is an additional advantage of polymer microneedles over silicon. It is increasingly clear that the favoured fabrication methods used

Progress and innovation of nanostructured sulfur cathodes and metal-free anodes for room-temperature Na–S batteries

• Marina Tabuyo-Martínez,
• Bernd Wicklein and
• Pilar Aranda

Beilstein J. Nanotechnol. 2021, 12, 995–1020, doi:10.3762/bjnano.12.75

• two fabrication methods of dispersed Na anodes. In one liquid Na is soaked into a porous scaffold, while in the other Na ions plate the porous host material. An example of the former method is the use of carbonized wood, into the open pore system of which liquid Na is soaked (Figure 9A) [67]. Also

Recent progress in actuation technologies of micro/nanorobots

• Ke Xu and
• Bing Liu

Beilstein J. Nanotechnol. 2021, 12, 756–765, doi:10.3762/bjnano.12.59

• biomedicine and other fields, new fabrication methods of micro/nanorobots should be explored, and more biocompatible nanomaterials should be selected to reduce costs and expand applications. Finally, problems of clinical testing and practical application. There is still a long way to go before the micro

Paper-based triboelectric nanogenerators and their applications: a review

• Jing Han,
• Nuo Xu,
• Yuchen Liang,
• Mei Ding,
• Junyi Zhai,
• Qijun Sun and
• Zhong Lin Wang

Beilstein J. Nanotechnol. 2021, 12, 151–171, doi:10.3762/bjnano.12.12

• several typical examples in which P-TENGs are used. This paper starts with an overview of TENGs and the corresponding working mechanism of four basic working modes based on charge transfer and on the electron-cloud potential-well model. Regarding surface modification and fabrication methods involving

Hexagonal boron nitride: a review of the emerging material platform for single-photon sources and the spin–photon interface

• Stefania Castelletto,
• Faraz A. Inam,
• Shin-ichiro Sato and
• Alberto Boretti

Beilstein J. Nanotechnol. 2020, 11, 740–769, doi:10.3762/bjnano.11.61

• view, host material and fabrication methods are detailed in the following sections. We will now discuss the discovery of these SPSs in the different material platforms of h-BN from bulk to 2D, 1D, and 0D material form. Bulk material Martínez et al. [98] shows for the first time an SPE in bulk

• devices. Fabrication and localization methods Here we summarize the large variety of fabrication methods used to create SPEs in various types of h-BN materials (mostly flakes and CVD h-BN), in the attempt to determine their physical origin or atomistic attribution. The methods do not provide information

Recent progress in perovskite solar cells: the perovskite layer

• Xianfeng Dai,
• Ke Xu and
• Fanan Wei

Beilstein J. Nanotechnol. 2020, 11, 51–60, doi:10.3762/bjnano.11.5

• general additive to improve the quality of perovskite films and could be used in other scalable fabrication methods to enable the high-speed deposition of perovskite films. The strategy may open up new dimensions of the fabrication of large-area perovskite solar modules at a high speed and thus enhance

Integration of sharp silicon nitride tips into high-speed SU8 cantilevers in a batch fabrication process

• Nahid Hosseini,
• Matthias Neuenschwander,
• Oliver Peric,
• Santiago H. Andany,
• Jonathan D. Adams and
• Georg E. Fantner

Beilstein J. Nanotechnol. 2019, 10, 2357–2363, doi:10.3762/bjnano.10.226

• of reduced quality and can seriously mislead users [4]. New fabrication methods have enabled increased tip sharpness and uniformity, so that commercial AFM cantilevers now have a standard tip quality. A range of specialized AFM techniques require custom tip designs, including high-speed AFM [5][6

Fabrication and characterization of Si_1−xGe_x nanocrystals in as-grown and annealed structures: a comparative study

• Muhammad Taha Sultan,
• Adrian Valentin Maraloiu,
• Ionel Stavarache,
• Jón Tómas Gudmundsson,
• Andrei Manolescu,
• Valentin Serban Teodorescu,
• Magdalena Lidia Ciurea and
• Halldór Gudfinnur Svavarsson

Beilstein J. Nanotechnol. 2019, 10, 1873–1882, doi:10.3762/bjnano.10.182

• technology [19][20][21]. Various fabrication methods have been utilized to fabricate structures with SiGe NCs embedded in an oxide matrix [13][17][22][23]. Magnetron sputtering is one of the most versatile methods and it allows for a good control over the NCs formation [24] by a addition of rapid thermal

Revisiting semicontinuous silver films as surface-enhanced Raman spectroscopy substrates

• Malwina Liszewska,
• Bogusław Budner,
• Małgorzata Norek,
• Bartłomiej J. Jankiewicz and
• Piotr Nyga

Beilstein J. Nanotechnol. 2019, 10, 1048–1055, doi:10.3762/bjnano.10.105

• structures [19][20]. Chemical fabrication methods are powerful in terms of the vast variety of attainable structure types, possible enhancement factors, and low cost of fabrication. However, reproducibility of SERS substrates can be an issue and the chemical compounds used for fabrication or stabilization of

Biological and biomimetic surfaces: adhesion, friction and wetting phenomena

• Stanislav N. Gorb,
• Kerstin Koch and
• Lars Heepe

Beilstein J. Nanotechnol. 2019, 10, 481–482, doi:10.3762/bjnano.10.48

• document the recent progress of transferring these findings into artificial materials and surfaces using advanced fabrication methods and highlight the broad spectrum of both experimental and theoretical techniques to characterize biological and bioinspired surfaces. Out of the 19 collected articles, eight

Femtosecond laser-assisted fabrication of chalcopyrite micro-concentrator photovoltaics

• Franziska Ringleb,
• Stefan Andree,
• Berit Heidmann,
• Jörn Bonse,
• Katharina Eylers,
• Owen Ernst,
• Torsten Boeck,
• Martina Schmid and
• Jörg Krüger

Beilstein J. Nanotechnol. 2018, 9, 3025–3038, doi:10.3762/bjnano.9.281

• fabrication methods for microabsorbers. In thin-film photovoltaics, Cu(In,Ga)Se2 (CIGSe) solar cells with an efficiency record of 22.9% for planar cells [2] and 19.2% for sub-modules [3] are among the leading technologies. Figure 1 shows the structure of a planar CIGSe solar cell representing the current

Low cost tips for tip-enhanced Raman spectroscopy fabricated by two-step electrochemical etching of 125 µm diameter gold wires

• Antonino Foti,
• Francesco Barreca,
• Enza Fazio,
• Cristiano D’Andrea,
• Paolo Matteini,
• Onofrio Maria Maragò and
• Pietro Giuseppe Gucciardi

Beilstein J. Nanotechnol. 2018, 9, 2718–2729, doi:10.3762/bjnano.9.254

• deposition (EBID) and focused ion beam (FIB) milling [41][42][43] (see [30][44] for reviews). Fabrication methods capable of guaranteeing high reproducibility, cost-effectiveness and scalability to industrial production are, however, still not available at present. Metal vapor deposition on AFM tips is

High-throughput synthesis of modified Fresnel zone plate arrays via ion beam lithography

• Kahraman Keskinbora,
• Umut Tunca Sanli,
• Margarita Baluktsian,
• Corinne Grévent,
• Markus Weigand and
• Gisela Schütz

Beilstein J. Nanotechnol. 2018, 9, 2049–2056, doi:10.3762/bjnano.9.194

• alternative FZP fabrication techniques gained some attraction thanks to the improvements in layer deposition [15][16][17][18][19][20][21][22][23][24][25], etching methods [26], and fabrication methods based on focused ion beams [18][21][27][28][29][30][31]. One particular implementation of focused ion beams

Room-temperature single-photon emitters in titanium dioxide optical defects

• Kelvin Chung,
• Yu H. Leung,
• Chap H. To,
• Aleksandra B. Djurišić and
• Snjezana Tomljenovic-Hanic

Beilstein J. Nanotechnol. 2018, 9, 1085–1094, doi:10.3762/bjnano.9.100

• treatment is also required. To the best of our knowledge, we can only conclude that we did not observe single-photon emission in some morphologies probably due to different fabrication methods and annealing temperatures. It can be inferred that for these two morphologies there is a pure non-radiative decay

Review: Electrostatically actuated nanobeam-based nanoelectromechanical switches – materials solutions and operational conditions

• Liga Jasulaneca,
• Jelena Kosmaca,
• Raimonds Meija,
• Jana Andzane and
• Donats Erts

Beilstein J. Nanotechnol. 2018, 9, 271–300, doi:10.3762/bjnano.9.29

Atomic layer deposition and properties of ZrO₂/Fe₂O₃ thin films

• Kristjan Kalam,
• Helina Seemen,
• Peeter Ritslaid,
• Mihkel Rähn,
• Aile Tamm,
• Kaupo Kukli,
• Aarne Kasikov,
• Joosep Link,
• Raivo Stern,
• Salvador Dueñas,
• Helena Castán and
• Héctor García

Beilstein J. Nanotechnol. 2018, 9, 119–128, doi:10.3762/bjnano.9.14

• deposited ZrO2 were compared from the viewpoint of ferroelectric behavior [21], whereby ALD precursors were Zr-based metal organic precursors (TEMAZr) and H2O. Both fabrication methods provided samples with antiferroelectric behavior. Here, ZrO2 films doped with Fe2O3 were grown by atomic layer deposition

Refractive index sensing and surface-enhanced Raman spectroscopy using silver–gold layered bimetallic plasmonic crystals

• Somi Kang,
• Sean E. Lehman,
• Matthew V. Schulmerich,
• An-Phong Le,
• Tae-woo Lee,
• Stephen K. Gray,
• Rohit Bhargava and
• Ralph G. Nuzzo

Beilstein J. Nanotechnol. 2017, 8, 2492–2503, doi:10.3762/bjnano.8.249

• , and nanoscale holes or voids to effect couplings and further obtain stronger electromagnetic fields and higher spatial resolution from localized surface plasmon resonance (LSPR) [18][19][20][21][22][23][24][25][26][27]. Many fabrication methods have been described that provide structures capable of

Expanding the molecular-ruler process through vapor deposition of hexadecanethiol

• Alexandra M. Patron,
• Timothy S. Hooker,
• Daniel F. Santavicca,
• Corey P. Causey and
• Thomas J. Mullen

Beilstein J. Nanotechnol. 2017, 8, 2339–2344, doi:10.3762/bjnano.8.233

• ; Findings In a time when many technological advances are driven by the miniaturization of fabrication methods, much effort has been placed on the development of novel methods to produce nanoscale features with chemical functionalities that go beyond traditional semiconductors [1][2][3]. Recent advances in